Paragon Kilns
  
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu

Printer Friendly

Product: GL24A, Old Style Kiln, Model/SKU: GL24A, Price: $0.00

GL24A, Old Style

Glass Fusing    Glass Painting    Glass Slumping   


Paragon Old-Style GL-22AD Manual-Fire Glass Fusing Kiln

This model has been replaced by the Professional Series GL-24AD. Though the earlier model is no longer in production, you can still access the wiring diagram, replacement parts, and instruction manuals by scrolling down to the bottom of this page.

The GL-22A is 13 1/4” high inside with room to bend glass for curved windows or cabinet doors and to repair lamp shades. Make huge glass-fused platters. Crack the door to drag a rod across the softened glass or to emboss designs in the surface.

Paragon’s GL-series are made for years of rigorous firing, as artists all over America can attest. The insulating firebrick, wrapped in heavy-gauge steel, soak up heat for slow, even cooling.

The GL-series lid elements use a new element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins.

The spring-pressure latch and a ½" recess around the edge of the firebrick door seal the door tight. The door remains rock-steady on a heavy hinge shaft. Four hand lifts aid moving. The base is open in the back and slotted to dissipate heat.

Watch the red-hot glass through two tapered peepholes, drilled one above the other in the wall opposite the switch box. Peephole plugs are included.

Optional Kiln Stand

The heavy-duty GL-series stand raises your GL-18, GL-22 or GL-24 kiln to a convenient working height. Begin operating your new kiln without having to find a table strong enough to support over 300 pounds. The table is 147 pounds of rock solid construction.

ST-8: without casters—30 ¼” square x 28 ¼” high, 147 lb.

ST-8-1: with 2" steel casters—30 ¼" square x 30 ¾” high, 150 lb.

Furniture Kit for GL-22 Series

The glass must always be fired on a kiln shelf rather than directly on the kiln’s firebrick bottom.

1 - C-20 - 20” Square Shelf

4 - 1” wide Square Posts, ½” long

1 lb. Bag Glass Separator

 

Have something good to say about the GL24A, Old Style? Tell Us

Product Videos

  • Watch & Listen to P001 The Paragon Kiln Factory Sheetmetal Department (3 min 40 sec)
  • Watch & Listen to P004 The Paragon Kiln Factory Square Kiln Assembly Line (4 min 30 sec)
  • Watch & Listen to P005 The Paragon Kiln Factory Firebrick Room (6 min 47 sec)
  • Watch & Listen to P008 The Paragon Kiln Factory Inspection Station (1 min 50 sec)
  • Watch & Listen to U005 Safe Installation of the Studio Electric Kiln (3 min 9 sec)


  • Specifications

    Max. Temperature

    1700F
    926C

    Amps

    30

    Phase

    1

    Watts

    7200

    Nema

    6-50R

    Breaker Size

    40

    Circuit Copper Wire Size

    6 gauge

    TUV tested to CSA and UL Standard 499

    Y

    CE

    N

    IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.

    Control Type


    Infinite Control Switch

    Voltage

    240

    Hertz

    60

    Nema Details







    Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

    The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

    Kiln Type

    Front Loading Square

    Sides

    4

    Understanding Chamber Measurements

    Chamber Volume

    4.68 CU.FT.
    132.52 litres

    Chamber Width

    24.00 IN
    610 mm

    Chamber Depth

    22.50 IN
    572 mm

    Chamber Height

    15.00 IN
    381 mm


    The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

    Outer Size

    40.50W x 32.00D x 29.50H Inches
    1029W x 813D x 749H mm

    Ship Size

    47.00W x 43.00D x 42.00H Inches
    1194W x 1092D x 1067H mm

    Ship Weight

    425.00 Lbs.
    192.78 Kg.

    Ship Method & Notations

    This Kiln Ships Via Truck





    Part Number

    GL24A   * Base Model

    Price

    $0.00

    Quantity

      


    Find A Local Paragon Seller

    Purchase your Paragon Kiln through one of our authorized resellers / distributors and get local service.

    Find A Local Seller Now!






    Options


    Click on the part numbers below to see full descriptions.

    Part Number

    Description

    Quantity

    Price

    ST-8-2 Kiln Stand with Casters 21" High

    ST-8-2, with casters. Deluxe GL Stand for GL-18, GL-22, GL-24, Pearl-18, and other Paragon kilns. The heavy-duty ST8-2 stand raises your kiln to a convenient 21" height. Begin operating your new kiln without having to find a table strong enough to su

    $514.08

    PY-71 Thermocouple with Lead Wires and Plug

    Thermocouple, K-type, with 5’ lead wires for the DT2-7 pyrometer. 4 1/4” long thermocouple fits into a 1/4” wide hole. Thermocouple flat-pin mini connector fits many meters such as the Fluke 53/54 IIB.

    $34.68

    ST-8 Kiln Stand without Casters 28 High

    ST-8, without casters. Deluxe stand for GL-18, GL-22, GL-24, Pearl-18, Pearl-22, and other Paragon kilns. The heavy-duty ST-8 stand raises your kiln to a convenient 28" height. Begin operating your kiln without having to find a table strong enough to

    $485.21

    ST-8-3 Kiln Stand with Casters 28 High

    ST-8-3, with casters. Deluxe GL Stand for GL-18, GL-22, GL-24, Pearl-18, and other Paragon kilns. The heavy-duty ST8-3 stand raises your kiln to a convenient 28" height. Begin operating your new kiln without having to find a table strong enough to su

    $572.99

    DT2-7 Digital Hand-Held Pyrometer, Degrees F

    Measure high temperatures with digital accuracy on a modest budget. The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know

    $100.98

    VENTMASTER 120, Installed on Kiln

    KILNVENT MASTER 120V M9 VENT MASTER, Installed (on large 4-sided kilns)

    The patented Orton Vent Master not only vents fumes but also improves firing results. At this price, the vent is factory-installed onto the back of the kiln.

    $635.46

    2 inch x 2 inch Glass Window, E Series Style

    Watch the bright red kiln interior through the optional 2” x 2” high-temperature glass window. (Note: always wear firing safety glasses when viewing the kiln interior. The kiln may not reach its maximum temperature and may fire a little slower when e

    $67.32

    ST-8-1 Kiln Stand with Casters 31" High

    The heavy-duty ST8-1 stand raises your kiln to a convenient 30 3/4" height. Begin operating your new kiln without having to find a table strong enough to support it. Move the kiln out of the way when not in use with smooth-rolling steel casters. The

    $572.22

    Mercury Relays, Two TF-26s per kiln 30 amps ea

    Order your new kiln with the factory installed mercury relay upgrade, The mercury relay is quiet and reliable. The life of a mercury relay has been measured in millions of on/off cycles. Mercury relays outlast the standard mechanical relays and are a

    $257.04

    Ceramic Fiber Top with Ball Groove

    This kiln can be ordered with an optional ceramic fiber top to replace the firebrick top. (Please note that the price shown here is for a factory-installed optional lid on a new kiln.) Serious glass artists have long requested the fiber top for their

    $374.85

    Ceramic Fiber Top with Embedded Elements

    This kiln can be ordered with an optional ceramic fiber top to replace the firebrick top. (Please note that the price shown here is for a factory-installed optional lid on a new kiln.) The elements are embedded into the ceramic fiber. This eliminates

    $805.39

    Door Safety Switch

    The optional door safety switch turns off power to the heating elements when the door is opened. The controller remains powered. The switch turns the power to the elements back on when the door is closed. The switch mounts to the top of the door hing

    $80.58

    DT2-9 Digital Hand-Held Pyrometer, Degrees C

    Enjoy digital accuracy on a modest budget. The DT2-9 digital pyrometer measures kiln temperature for improved firing results. With the DT2-9 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring

    $100.98

    Turquoise Paint

    At no extra charge, you can order your Paragon kiln in turquoise instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The turquoise kiln shown her

    $0.00

    Hot Pink Paint

    At no extra charge, you can order your Paragon kiln in bright hot pink instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The hot pink kiln show

    $0.00

    Purple Paint

    At no extra charge, you can order your Paragon kiln in luxuriant purple instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The purple kiln shown

    $0.00

    Berry Paint

    At no extra charge, you can order your Paragon kiln in rich berry instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The berry kiln shown here a

    $0.00

    Navy Paint

    At no extra charge, you can order your Paragon kiln in navy instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The navy kiln shown here also ma

    $0.00

    Jade Paint

    At no extra charge, you can order your Paragon kiln in jade instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The jade kiln shown here also may

    $0.00

    FSGL24A Furniture Kit

    Recommended furniture kit for the Paragon GL-24 series and equivalent sized kilns. Included:

    1 - C-30 Shelf (22” square x 1”)

    4 – 1/2” long, 1” wide Square Posts<

    $178.50

    T-2 Pyrometer

    Pyrometer, needle indicator, 2200 degrees F maximum temperature. Includes a K-type thermocouple.

    $192.78

    Firing Safety Glasses

    Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see.

    Paragon no longer sells firing safety glasses. Instead, you

    $0.00




    Accessories

  • View Accessories For GL24A, Old Style



  • Usages

  • Discontinued Models

  • Additional Information

  • Options
  • Replacement Parts
  • Accessories
  • Important Shipping Information
  • Wiring Diagrams

    GL24A

  • Manuals
          Glass Kiln Instruction & Service Manual


  • GL24A, Old Style Kiln   Model/SKU: GL24A




    Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

    Kilns Sold

    Get The Adobe Reader

    Home

  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"