Paragon Kilns
  
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu

Printer Friendly

Product: KM36T Kiln, Model/SKU: 5F61221D00, Price: $2,019.60

KM36T

Knife Making   


Paragon KM-36T Knife Maker’s Heat Treating Furnace

Wherever humans have withstood severe tests—whether in the steaming jungles of the South Pacific, the cruel deserts of Iraq and Afghanistan, or the Chosen Reservoir—they have depended upon great knives. Wherever explorers have gone, they have taken great knives with them—over the prairies and mountains of the American west, across the desolate plains of the North Pole, through the silence of deep space.

Knives have always accompanied explorers on great journeys. Yet knife making, itself, is an adventure all its own. It begins when the future owner shares the dream of a special knife with the maker. They talk excitedly over the first rough sketches. Then the maker retires to his shop and loses himself in the creation of the knife. Time disappears; the hours tick by as he grinds, heat treats, polishes.

Choose a side swing door or a drop door

You can order a Paragon knifemaking furnace with either a drop door or a side-swing door. (The photo above shows the traditional drop door. Scroll down to Options to see the side swing door.) The price of the furnace is the same with either door style.

The drop door opens downward with one-handed operation. A counter-weight handle holds the door securely closed. The door, whether drop or side-swing, is mounted on a heavy-duty 1/2” thick hinge shaft for smooth opening. Because of the rigid case and heavy hinge, the door is sturdy enough for years of faithful service.

Door safety switch

The door micro safety switch shuts off the power to the elements when the door is opened, yet the controller continues to give a temperature readout. The safety switch is standard on Paragon KM furnaces.

Choose from the optional paint colors

As shown in the photos, the standard knifemaking furnaces are painted a deep black, which would look perfect in your shop. You can choose a different paint color at no extra charge. (Choose from the paint colors listed below the furnace specifications. Scroll down.)

Test exotic heat treating formulas

When you own a Paragon KM-36T furnace, you can live the knife making adventure to the fullest. The soul of the blade is born in the crucible of the furnace that resides in your own shop.

Many knifemakers enjoy owning a furnace, because they can test their favorite steels in many ways. After altering the heat treating formula, they put blades through severe tests. Yes, they test for Rockwell hardness, but they don’t stop there. The serious knifemaker tests the knife against hemp rope and 2x4s. They bend the blade to 45° or even 90°. Then they straighten the blade, slap on a handle and test it in the real world.

The knife maker with a KM-series furnace can try exotic heat treating methods at his leisure. Does quenching in dry ice improve blade performance? What happens when 52100 steel is triple-quenched with a one-day wait between each quench? After this treatment, will a 52100 blade bend to 90° without chipping?

With a Paragon furnace in your shop, all questions about heat treating formulas are settled. Theory is changed to fact, which becomes part of the soul of your blades. You find out for yourself what works. Testing and heat treating is at the heart of the knife making adventure. Here is where your confidence as a knife maker takes root.

Experiment with differential hardening, an ancient bladesmith technique. Try out the newest tool steels. Are they really as good as the tried and true 52100, D2 and A2? Paragon’s knifemaking furnaces are now rated to 2350 degrees F, so you can heat treat as hot as you need to.

A message from Ed Fowler—explorer, author, and founder of High Endurance Performance Knife Association

“Paragon offered me no financial rewards or free equipment for this endorsement. I recommend Paragon furnaces only because they make an excellent, reliable product.

“I've made knives off and on since the sixth grade. I enjoy every second in the shop making knives. I used to harden and temper with a torch. As my skills increased, my testing of knives revealed the benefit of longer and more uniform soak times during the annealing and tempering cycles than were possible with a torch.

“I finally bought a Paragon furnace. It is extremely beneficial to bladesmithing, because it allows us to do things with our blades we couldn't do otherwise. If I had known how good they are, I would have bought one years before I did.

“You don't want to introduce any variables into your blades by accident, and temperature is one such variable. With a Paragon, you know exactly what causes what and why. My advice to beginning knifemakers is to use the best equipment you can as soon as you can add it to your shop. I wasted a lot of time and energy trying to make knives with less than the best equipment for the job. Invest in quality equipment, learn how to use it right, and use your time seeking the best knife you can make.

“Without my Paragon oven, I would have never made the discoveries about steel that I’ve made. I love my Paragon. That Paragon sure made a big difference in my knife making. Any experiment I want to run is right there. If I want to change a heat treatment, I know exactly how. With every knife, I learn more.

“Thermal cycles, commonly known as heat treating of blades, are the most significant single aspect contributing to the quality of a knifemaker’s blade. Knifemakers who wish to explore the absolute frontiers of the world of knives in search of the Excalibur of their dreams must have the ability to design thermal treatments specifically intended to push their steel to the highest limits of performance. Absolute control of the temperature of their blades is absolutely essential to success.

“Paragon makes a nice piece of equipment. I recommend it very highly to anyone who asks and to many people who don't ask. In order to make knives that my customers can depend upon, I have to be able to count on my equipment to provide consistent performance. My Paragon heat treating oven has always provided the degree of dependability I can count on to support my commitment to provide my customers the best functional knife possible.

“Believe me, I'm much richer knowing I'm making the best knife I can. I'm much happier with myself.”

A bond of trust between you and the knife owner

The knife maker’s credo is simple: to create a knife that represents the knife maker himself. For the knife maker, quality of work is a way of life. It is his or her passion. Anything less than one’s best is unthinkable.

The buyer of a custom knife appreciates fine detail. He or she marvels at the lines and curves the maker coaxed from the steel with such patience. There is a bond of trust between the owner of a fine knife and its maker. This is why the knife maker sleeps better when he or she controls every step in creating a knife.

The knife maker derives joy from creating knives that are not merely prized, but treasured. When the knife owner wipes a rag across such a knife, he or she is caressing as much as cleaning it. Part of this spirit of knife making is lost when you send the blade out for heat treating and await its return. Every time you, the maker, release one of your knives to the world, your reputation goes with it. This is why makers feel compelled to control every step in the blade’s journey from initial design through final polishing.

No more waiting for commercial heat treating

A Paragon KM-series furnace sets the knife maker free. No more wrapping blades and shipping them to your heat treater. No more waiting until you have a dozen blades to get the best price on heat treating. No more turning away orders for last-minute gifts.

While your furnace is hardening and tempering blades, you can busy yourself grinding more knives or fitting handles. After you’ve used your Paragon furnace awhile, you will wonder how you ever got along without it. When asked to make a knife on short notice—whether for a Marine Corps awards presentation, a soldier’s retirement party, or an archaeologist going to Africa—you will be ready. When a custom knife is needed as a going away gift, and the recipient is leaving in three days, you will be ready. Your KM-series furnace might even pay for itself on rush orders you would otherwise have missed.

Own a furnace and you alone decide when you will complete a knife. If you stay up one Friday grinding a knife, you can heat treat it that evening and deliver it Saturday morning. Just in time for a grateful wife to present to her husband on his birthday.

Finishing a knife whenever you want will excite you. You will find yourself working into the night to complete a new design. When you send the blade out for heat treating, the excitement of making it is forgotten. By the time the blade returns, you hardly remember it.

A full range of Paragon furnace sizes

The KM-series knifemaking furnaces come in seven interior sizes:

  • KM-14T and Xpress-KM-14T: 14 ½” long, 5 ½” wide, and 4 ¼” high
  • KM-18T and Xpress-KM-18T: 18” long, 5 ½” wide, and 4 ¼” high
  • KM-24T and Xpress-KM-24T: 24” long, 5 ½” wide, and 4 ¼” high
  • KM-36T and Xpress-KM-36T: 36” long, 5 ½” wide, and 4 ¼” high
  • KM-45T: 45” long, 5 ½” wide, and 4 ¼” high
  • Double Barrel 18: 18” long, 11” wide, and 4 ¼” high
  • Double Barrel 24: 24” long, 11” wide, and 4 ¼” high

Even if most of your knives would fit inside the KM-14T, you may ultimately be happier with the KM-24T, a popular size. Too much capacity may be better than too little. After all, it doesn’t hurt to heat shorter blades in the longer KM-24T; electrical consumption is minimal. Our newest KM-18T is mid-way in length between the KM-14T and KM-24T so you can buy just the right size for your needs.

Your choice of three temperature controllers

The Sentry 12-key controller is faster to program and has more features than the lower priced Sentry Xpress 3-key controller. Choose the controller that fits your budget.

Models with the 3-key Sentry Xpress controller: Xpress-KM-14T, Xpress-KM-18T, Xpress-KM-24T, Xpress-KM-36Tfont

Models with the 12-key Sentry controller: KM-14T, KM-18T, KM-24T, KM-36T, KM-45T, Double Barrel 18, Double Barrel 24

The standard KM furnaces can be upgraded with the Sentinel Smart Touch. Please scroll down to Options for details.

Solid furnace construction

The furnace is insulated with 3” thick refractory firebrick, which is 1/2” thicker than the standard. The elements are mounted in dropped, recessed grooves machined into the firebrick. This groove protects the element for long life and low maintenance. Elements are simple to replace because they can be lifted directly from the groove. You can replace elements following instructions in the printed manual. The firing chamber is protected by a rigid steel case. A built-in solid stand lifts the firing chamber safely off your worktable. The thermocouple wire is kept inside the control box for protection from the harsh environment of the typical bladesmith shop.

Printed instruction manuals

Your furnace includes a wiring diagram, a controller instruction manual, and a heat treating manual with heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manuals are written in plain English for the beginner.

Made in America

All Paragon furnaces are made in Mesquite, Texas USA. We are proud to support the American worker.

Optional Gas Injection Flow Meter

During heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil. Another way is to install the gas injection flow meter on your furnace. It is available as either an add-on kit, or you can order the furnace with the meter installed.

The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent some of the scaling. For more details, click on the link in the Options section below.

The knifemaking Kit

In addition to the furnace, you will need a Knifemaking Kit, which separates the blades and holds them parallel inside the furnace. Please click the link below in the Options section.

Thermocouple with “special limit” wire

The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.

Designed for production

Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

Optional colors at no extra charge

Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise. Scroll down to see color samples in the options section.

 

Have something good to say about the KM36T? Tell Us

Product Videos

  • Watch & Listen to P001 The Paragon Kiln Factory Sheetmetal Department (3 min 40 sec)
  • Watch & Listen to P004 The Paragon Kiln Factory Square Kiln Assembly Line (4 min 30 sec)
  • Watch & Listen to P005 The Paragon Kiln Factory Firebrick Room (6 min 47 sec)
  • Watch & Listen to P008 The Paragon Kiln Factory Inspection Station (1 min 50 sec)
  • Watch & Listen to Interactive Sentry 2.0 12-key Controller Demo
  • Watch & Listen to D005 Sentry 12-Key Controller Ramp-Hold Demonstration (5 min 10 sec)
  • Watch & Listen to D009 (Spanish) Demostracion de Como Incrementar y Mantener la Temperatura Con Un Control Sentry de 12 Teclas: Serie Operacion de Hornos Paragon (5 min 10 sec)
  • Watch & Listen to U005 Safe Installation of the Studio Electric Kiln (3 min 9 sec)



  • Specifications

    Max. Temperature

    2350F
    1287C

    Amps

    15

    Phase

    1

    Watts

    3600

    Nema

    6-20R

    Breaker Size

    20

    Circuit Copper Wire Size

    12 gauge

    TUV tested to CSA and UL Standard 499

    N

    CE

    N

    Control Type


    Sentry Digital 12-key Non-Ceramic

    Voltage

    240

    Hertz

    60

    Nema Details







    Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

    The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

    Kiln Type

    Front Loading Square

    Sides

    4

    Understanding Chamber Measurements

    Chamber Volume

    0.49 CU.FT.
    13.88 litres

    Chamber Width

    5.50 IN
    140 mm

    Chamber Depth

    36.00 IN
    914 mm

    Chamber Height

    4.25 IN
    108 mm


    The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

    Outer Size

    17.00W x 49.00D x 17.00H Inches
    432W x 1245D x 432H mm

    Ship Size

    28.80W x 41.00D x 23.00H Inches
    732W x 1041D x 584H mm

    Ship Weight

    176.00 Lbs.
    79.83 Kg.

    Ship Method & Notations

    This Kiln Ships Via Truck





    Part Number

    5F61221D00   * Base Model

    Price

    $2,019.60

    Quantity

      


    Find A Local Paragon Seller

    Purchase your Paragon Kiln through one of our authorized resellers / distributors and get local service.

    Find A Local Seller Now!






    Options


    Click on the part numbers below to see full descriptions.

    Part Number

    Description

    Quantity

    Price

    Sentinel Controller, optional on new kilns

    This kiln can be ordered with the optional Sentinel Smart Touch controller instead of the standard Sentry 2.0 12-key controller. The upgrade price is only for a Sentinel ordered with a new kiln. The Sentinel is available as an option on any Paragon k

    $122.40

    1332 Gas Inlet Flow Meter GIFM

    The Benefits and Limitations

    Oxygen in the furnace forms a scale on the surface of knife blades and other parts during heat treating. To avoid surface scale, wrap the parts in heat treating foil or inject an inert

    $233.48

    TF62

    RS232 PORT ON SENTRY 2 CONTROLLERS (PC CONTROL) The RS232 is a computer port mounted to the kiln. You can monitor the kiln from a computer and store a record of each firing on your hard drive. Print graphs of firings.

    $414.12

    Knifemakers Heat Treating Kit

    Contains 1 pair hot gloves, 1 heat treating fork, 4 knifeholders, and 8 firebrick supports.

    Hot Gloves

    For intermittent handling of hot objects up to 400° F. Sold in pairs. Not intended for handling hot blades.

    Heat Treating F

    $91.04

    Turquoise Paint

    At no extra charge, you can order your Paragon kiln in turquoise instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The turquoise kiln shown her

    $0.00

    Hot Pink Paint

    At no extra charge, you can order your Paragon kiln in bright hot pink instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The hot pink kiln show

    $0.00

    Purple Paint

    At no extra charge, you can order your Paragon kiln in luxuriant purple instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The purple kiln shown

    $0.00

    Berry Paint

    At no extra charge, you can order your Paragon kiln in rich berry instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The berry kiln shown here a

    $0.00

    Navy Paint

    At no extra charge, you can order your Paragon kiln in navy instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The navy kiln shown here also ma

    $0.00

    Jade Paint

    At no extra charge, you can order your Paragon kiln in jade instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The jade kiln shown here also may

    $0.00

    Side-Swing Furnace Door

    The prices of the knifemaking furnaces are the same whether your order your furnace with the traditional drop door or the side-swing door. The side-swing door is hinged at the side and includes the door safety switch. The rugged door is mounted on a

    $0.00

    Firing Safety Glasses

    Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see.

    Paragon no longer sells firing safety glasses. Instead, you

    $0.00




    Accessories

  • View Accessories For KM36T



  • Usages

  • Knife Making Furnaces

  • Additional Information

  • Options
  • Replacement Parts
  • Accessories
  • Important Shipping Information
  • Wiring Diagrams

    KM36D

  • Manuals
          Heat Treating Manual for KM & HT Series
          Sentry 2.0 12-Key Ramp-Hold Manual, 2010 Edition


  • KM36T Kiln   Model/SKU: 5F61221D00




    Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

    Kilns Sold

    Get The Adobe Reader

    Home

  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"