Kiln Support
  
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu

Kiln Pointers

Using the Hold Feature of a Digital Kiln

I decided to write a kiln pointer on the hold feature of digital kilns, because holding the temperature during a firing has many uses. Here are several:

1) Firing a few degrees cooler than normal and holding the temperature there for 10 – 20 minutes can heal pinholes in ceramic glazes, heal bubbles in fused glass, and bring out more intense colors in china paints.

2) Holding the temperature forms crystals in crystalline glazes. Some firing formulas include several heating and cooling segments with holds.

3) Temperature hold helps to improve the heat distribution inside the kiln. This may be especially useful when fusing glass in a ceramic kiln.

4) If the witness cone (the one placed on the ceramic shelf inside the kiln) is under-fired in Cone-Fire mode, add hold to the next firing. This is a simple way to correct under-firing. (Glass artists: Cone-Fire mode is used in ceramic firing. You will probably never use this mode.)

5) Hold allows the gases in ceramic greenware to burn out. This prevents firing problems such as pinholes, bloating, carbon coring, etc.

6) Firing to a lower temperature than normal and adding a few minutes of hold sometimes gives greater control of the firing. For instance, it may be easier in some kilns to control the stages of glass fusing by using hold.

Be careful how you use hold. It can easily over-fire the ware if you inadvertently enter 2 hours (02.00) instead of 20 minutes (00.20) of hold time. Experiment with small amounts of hold.

Temperature hold improves many ceramic glazes, but certainly not all of them. This is a matter of experimentation. Too much hold time could even alter the fit between the clay body and glaze.

According to the Orton Ceramic Foundation, one to two hours of hold is equivalent to firing to the next hotter pyrometric cone. This, too, is a matter of experimentation.

Wishing you a Happy New Year!

Arnold Howard Paragon Industries, L.P. 2011 South Town East Blvd. Mesquite, TX 75149-1122 972-288-7557 / 800-876-4328 Fax: 972-222-0646 arnoldhoward@att.net / www.paragonweb.com



Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader

Home

  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"